Code
Title
Published
IEC/TS 62844
Guidelines for quality and risk assessment for nano-enabled electrotechnical products
2016
IEC 62607-4-4
Nanomanufacturing - Key control characteristics - Part 4-4: Nano-enabled electrical energy storage - Thermal characterization of nanomaterials, Nail penetration method
2016
TNS M017001-2012
奈米產品 - 表面粒子尺度測定法 - 掃描式電子顯微鏡
2012
TNS A001001
奈米技術 - 奈米體(nano-objects)的術語與定義 - 奈米顆粒(nanoparticle)、奈米纖維(nanofibre)及奈米板(nanoplate)
2012
TNS003-2013
奈米技術 - 詞彙 - 第三部分 - 碳奈米體
2013
TNS004(TWA1)
奈米技術 - 核心(core) 術語
第一版草案，配合ISO會議結果修正
TNS005(TWA2)
奈米技術 - 薄膜材料壓痕測定法 - 奈米壓痕試驗機
2015
TNS006(TWA2,3)
奈米技術 - 液態粒子尺度測定法 - 電子顯微鏡
第一版草案, pending
TNS007(TWA4)
奈米技術 - 材料規格 - 規格化奈米體的準則
2015
TNS008(TWA2,3)
奈米產品品質和風險評估準則(IEC/TS 62844中文修正版)
提案通過
TNS008(TWA2,3)
奈米電工產品質和風險評估準則
進行草案撰寫
TNS009(TWA2)
奈米技術-溶液粒子之監控系統
新工作提案
TNS010(TWA2)
奈米技術 - 30 nm至100 nm液體性粒子計數器的計數之測試方法
提案通過
TN-001-2005
Standard on photocatalyst deodorized paints
2005, Taiwan
TN-002-2005
Standard on photocatalyst anti-bacterial ceramic tiles
2005, Taiwan
TN-003-2005
Standard on photocatalyst anti-bacterial light tubes
2005, Taiwan
TN-004-2006
Standard on photocatalyst anti-smudgy ceramic tiles
2006, Taiwan
TN-005-2006
Standard on anti-smudgy paints
2006, Taiwan
TN-006-2006
Standard on anti-abrasive PU synthetic leathers
2006, Taiwan
TN-007-2006
Standard on anti-abrasive PU resins
2006, Taiwan
TN-008-2006
Standard on anti-smudgy sanitary facilities
2006, Taiwan
TN-009-2006
Standard on photocatalyst air cleaning light tubes
2006, Taiwan
TN-010-2007
Standard on photocatalyst air purifier filter
2007, Taiwan
TN-011-2007
Standard on photocatalyst air purifier
2007, Taiwan
TN-012-2007
Standard on anti-smudgy metal partition
2007, Taiwan
TN-013-2007
Standard on nano-silver anti-bacterial household textile
2007, Taiwan
TN-014-2007
Standard on anti-smudgy range hood
2007, Taiwan
TN-015-2008
Standard on hydrophobic car wax
2008, Taiwan
TN-016-2008
Standard on nano silver anti-bacterial marbles
2008, Taiwan
TN-017-2008
Standard on nano silver anti-bacterial socks
2008, Taiwan
TN-018-2008
Standard on anti-corrosion fasteners
2008, Taiwan
TN-019-2009
Standard on nano silver anti-bacterial plastic container
2009, Taiwan
TN-020-2009
Standard on anti-abrasive synthetic leathers for bicycle seat cushion
2009, Taiwan
TN-021-2009
Standard on fireproofed nano paint for wooden materials
2009, Taiwan
TN-022-2009
Standard on nano mineral far-infrared textile
2009, Taiwan
TN-023-2009
Standard on nano coated UV protection textile
2009, Taiwan
TN-024-2010
Standard on nano-silver anti-bacterial textile
2010, Taiwan
TN-025-2010
Standard on nano aluminum coated materials for weatherproofing
2010, Taiwan
TN-026-2010
Standard on nano textile for solar radiation protection
2010, Taiwan
TN-027-2010
Standard on photocatalyst self-clean Polycarbonate building material
2010, Taiwan
TN-028-2010
Standard on nano-material coated foam for heat resistant and Anti-shrinking
2010, Taiwan
TN-029-2010
Standard on nano modified textiles for Instant cool feeling
2010, Taiwan
TN-030-2010
Standard on amphiphobic architectural coatings for antifouling
2010, Taiwan
TN-031-2011
Standard on self-cleaning nano photocatalyst paint
2011, Taiwan
TN-032-2011
Standard on wooden board containing nano metal oxides for anti-bacterial
2011, Taiwan
TN-033-2011
Standard on consumer electronics enclosure containing nano silver for anti-bacterial
2011 , Taiwan
TN-034-2011
Standard on nano metal oxide transparent heat insulation film
2011, Taiwan
TN-035-2011
Standard on nano silver antibacterial sanitary ceramic ware
2011, Taiwan
TN-036-2011
Standard on nano silver antibacterial plastic toilet lid
2011, Taiwan
TN-038-2011
Standard on nano silver antibacterial plastic toilet tank parts
2011, Taiwan
TN-039-2012
Standard on nano silver antibacterial water-based paint for interior decoration
2012, Taiwan
TN-040-2012
Standard on nano photocatalyst antibacterial coatings
2012, Taiwan
TN-041-2012
Standard on nano surface treatment stain-resistant ceramic tiles
2012, Taiwan
TN-042-2012
Standard on nano silver antimicrobial plastic bathtub
2012, Taiwan
TN-043-2012
Standard on nano silver antimicrobial plasticity elastomer
2012, Taiwan
TN-044-2012
Standard on nano surface treatment insulated glass
2012, Taiwan
TN-045-2012
Standard on nano porous carbon de-chlorination filter for industrial water
2012, Taiwan
TN-046-2013
Standard on nano-metal complexes with antibacterial interior wall ceramic tiles
2013, Taiwan
TN-047-2013
Standard on nano silver antimicrobial engineering plastics braid tube
2013, Taiwan
TN-048-2013
Standard on nano metal oxide antibacterial for furniture board
2013, Taiwan
TN-049-2013
Standard on nano lubricants for wear
2013, Taiwan
TN-050-2013
Standard on nano anti-bacterial coating materials
2013, Taiwan
TN-051-2013
Standard on nano antibacterial textiles
2013, Taiwan
TN-052-2013
Standard on nano antibacterial products
2013, Taiwan
Existing standards/documents relevant to ISO/TC 229
Code
Title
Published
ATS 5200.473-2007
Technical Specification for plumbing and drainage products - Stainless steel/nano-antibiotic PP-R pipe systems for water supply applications
2007, Australia
Book-2008
Nanotechnology standards (2008.01)
2008, China
Local Standard-2008
Shanghai standard on “Evaluation method on photocatalyst activities”
2008, China
Industrial Standard
Nanotechnology on clothes
, China
GB/T 11847-1989
Determination of specific surface area of uranium dioxide powder by multipoint BET method
1989, China
GB/T 13390-1992
Metallic powder - Determination of the specific surface area - Method of nitrogen adsorption
1992, China
GJB 1713-1993
Specification for nanometer laser polarized interferometer
1993, China
GB/T 17507-1998
General specification of thin biological standards for X-ray EDS microanalysis in electron microscope
1998, China
GB/T 12334-2001
Metallic and other inorganic coatings--Definitions and conventions concerning the measurement of thickness
2001, China
GB/T 18873-2002
General specification of transmission electron microscope(TEM)-X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
2002, China
GB/T 18907-2002
Method of selected area electron diffraction for transmission electron microscopes
2002, China
GB/T 6524-2003
Metallic powders - Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
2003, China
GB/T 10722-2003
Carbon black - Determination of total and external surface area by nitrogen adsorption
2003, China
GB/T 19345-2003
Amorphous and nanocrystalline soft magnetic alloy strips
2003, China
GB/T 19346-2003
Measuring method of magnetic properties at alternative current for amorphous and nanocrystalline soft magnetic alloys
2003, China
GB/T 19588-2004
Nano-Nickel powder
2004, China
GB/T 19589-2004
Nano-Zinc oxide
2004, China
GB/T 19590-2004
Nano-calcium carbonate (revision 2008)
2008, China
GB/T 19591-2004
Nano-titanium dioxide
2004, China
GB/T 21511.2-2008
Nano-apatite/polyamide composite - Part 2: technology requirements
2008, China
GB/T 19077.1-2003
Particle size analysis - Laser diffraction method
2003, China
GB/T 19619-2004
Terminology for nanomaterials
2004, China
GB/T 13221-2004
Nanometer powder - Determination of particle size distribution - Small angle X-ray scattering method
2004, China
GB/T 19587-2004
Determination of the specific surface area of solids by gas adsorption using the BET method
2004, China
GB/T 19921-2005
Test method of particles on silicon wafer surfaces
2005, China
GB/T 19922-2005
Standard test methods for measuring site flatness on silicon wafers by noncontact scanning
2005, China
GB/T 19627-2005
Particle size analysis - Photon correlation spectroscopy
GB/T 15445.2-2006
Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
2006, China
GB/T 15445.4-2006
Representation of results of particle size analysis - Part 4: Characterization of a classification process
2006, China
GB/T 18735-2014
Guideline for microbeam analysis for nano-thin film using electron microscope (AEM/EDS)
2014, China
GB/T 20099-2006
Sample preparation - Dispersing procedures for powders in liquids (ISO 14887：2000, IDT)
2006, China
GB/T 20307-2006
General rules for nanometer-scale length measurement by SEM
2006, China
GB/T 20170.1-2006
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds
2006, China
GB/T 20170.2-2006
Test method of physical characters of rare earth metals and compounds - Determination on specific surface area of rare earth compounds
2006, China
GB/T 20724-2006
Method of thickness measurement for thin crystal by convergent beam electron diffraction
2006, China
GB/T 20725-2006
Electron probe microanalysis guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
2006, China
GB/T 21510-2008
Antimicrobial property detection methods for nano-inorganic materials
2008, China
GB/T 21511.1-2008
Nano-apatite/Polyamide composite - Part 1: Designation
2008, China
GB/Z 21738-2008
Fundamental structures of one dimensional nanomaterials - High resolution electron microscopy characterization
2008, China
GB/T 22458-2008
General rules of instrumented nanoindentation test
2008, China
GB/T 22462-2008
Nano Sub-micron scale film on steel - Quantitative depth profile analysis - Glow discharge atomic emission spectrometry
2008, China
GB/T 22925-2009
Nanotechnology-treated clothes
2009, China
GB/T 23413-2009
Determination of crystallite size and micro-strain of nano-materials-X-ray diffraction line broadening method
2009, China
GB/T 24491-2009
Multi-walled carbon nanotubes
2009, China
GB/T 23761-2009
Test method of photocatalytic materials for air purification
2009, China
GB/T 23762-2009
Test method of photocatalytic materials for purification of water solution
2009, China
GB/T 23764-2009
Test method of photocatalytic materials for self-cleaning
2009, China
GB/T 24368.1-2009
Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement.
2009, China
GB/T 24369.1-2009
Characterization of gold nanorods：UV-Vis-NIR absorption spectroscopy
2009, China
GB/T 24370-2009
Characterization of CdSe Nanocrystal Quantum Dots using UV-Vis Absorption Spectroscopy.
2009, China
GB/T 24490-2009
Test method for purity of multi-walled carbon nanotubes
2009, China
GB/T 25898-2010
Instrumental nanoindentation test methods for thin film indentation hardness and elastic modulus
2010, China
GB/Z 26082-2010
DC magnetic susceptibility (magnetic moment) measurement for nanomaterials
2010, China
GB/Z 26083-2010
Structure test method for eight octyloxy phthalocyanine molecule adsorbed on graphite surface(STM)
2010, China
GB/T 26489-2011
Methods for measuring super amphiphilicity of nanomaterials
2011, China
GB/T 26490-2011
Methods for measuring super hydrophobicity of nanomaterials
2011, China
GB/T 26824-2011
Nano-alumina
2011, China
GB/T 26826-2011
Measurement for diameter of carbon nanotubes
2011, China
GB/T 28044-2011
General guide of detection method for nanomaterial biological effect by transmission electron microscope(TEM)
2012, China
GB/T 28973-2012
Tomato ringspot virus quarantine identification method -Nanoparticles sensitizing colloidal gold Immunochromatography
2012, China
GB/T 28974-2012
Potato virus A quarantine identification method - nanoparticles sensitizing colloidal gold immunochromatography
2012, China
GB/T 28975-2012
Lettuce mosaic virus quarantine identification method -nanoparticles sensitizing colloidal gold immunochromatography
2012, China
GB/T 29189-2012
Thermal gravimetric analysis for temperature and ash of carbon nanotubes oxidation
2012, China
GB/T 28872-2012
Nanostructures measurement method for live cell sample using magnetic driving tapping mode of atomic force microscopy
2012, China
GB/T 28873-2012
Generic measuring method of nanoparticles biological morphology effect using environmental scanning electron microscope
2012, China
GB/T 29190-2012
Drift rate measurement methods of Scanning probe microscopy
2012, China
GB/T 29025-2012
Granularity analysis - resistance method
2012, China
GB/T 29024.3-2012
Granularity analysis - single-particle optical measurement method: Part 3: liquid particle counter photoresist method
2012, China
GB/T 1480-2012
Granularity test method of the dry sieved metal powder
2012, China
GB/T 27760-2011
Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using Si(111) monatomic steps
2011, China
GB/T 27761-2011
Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
2011, China
GB/T 27762-2011
Standard test method for mass scale calibration of thermogravimetric analyzer
2011, China
GB/T 27765-2011
Testing methods of SiO2,TiO2,Fe3O4 and Al2O3 nanoparticles biological effect by transmission electron microscope(TEM)
2011, China
GB/T 29022-2012
Particle size analysis-Dynamic light scattering(DLS)
2013, China
GB/T 29856-2013
Characterization of semiconducting single-walled carbon nanotubes using near infrared photoluminescence spectroscopy
2014, China
GB/T 30447-2013
Measurement method for contact angle of nano-film surface
2014, China
GB/T 30448-2013
Nanoscale iron powder
2014, China
GB/T 30449-2013
Nanoscale tin dioxide
2014, China
GB/T 30450-2013
Nano-cadmium sulfide
2014, China
GB/T 30543-2014
Nanotechnologies - Characterization of single-wall carbon nanotubes using transmission electron microscopy
2014, China
GB/T 30544.1-2014
Nanotechnologies - Vocabulary - Part 1:Core terms
2014, China
GB/T 30544.5-2014
Nanotechnologies - Vocabulary - Part 5:Nano/bio interface
2014, China
GB/T 31228-2014
Terminology for instrumented nanoindentation test
2015, China
HG/T 3791-2015
Suspension poly (vinyl chloride) resins via vinyl chloride and nano-calcium carbonate in situ polymerization
2015, China
HG/T 3819-2006
Nano-synthetic hydrotalcite
2006, China
HG/T 3820-2006
Methods of test for Nano-synthetic hydrotalcite
2006, China
HG/T 3821-2006
Nano-powder of magnesium hydroxide
2006, China
HY/T 113-2008
Membrane and element of nanofiltration
2008, China
HY/T 114-2008
Nanofiltration device
2008, China
SN/T 2041-2008
Rules for inspection of nano-titanium dioxide
2008, China
SN/T 2042-2008
Rules for inspection of nano-calcium silicatee
2008, China
SN/T 2043-2008
Rules for inspection of nano-calcium carbonate
2008, China
SN/T 2044-2008
Rules for inspection of nano-alumina
2008, China
SN/T 2518-2010
Shellfish foodborne virus detection using nano magnetic beads - gene chip method
2010, China
SN/T 3502-2010
Clenbuterol detection method using nano-magnetic indicator paper
2013, China
SN/T 3503-2010
Ractopamine detection method using nano magnetic indicator paper
2013, China
SN/T 4022-2014
Determination of lead trace of textiles from the nano-titanium dioxide - ICP-AES method
2014, China
FZ/T 54056-2012
Ultra-high molecular weight polyethylene(UHMWPE)/nano-carbon tube filament yarns
2013, China
LY/T 2144-2013
Bamboo charcoal for air-purification package
2013, China
JB/T 11765-2014
Superhard nanocrystalline diamond abrasive
2015, China
JG/T 384-2012
Thermal insulation glass with nano-coating for doors,windows and curtain walls
2013, China
JC/T 2144-2012
Test method for purity of carbon nanotubes
2014, China
DB44/T 1215-2013
Characterization of single-walled carbon nanotubes using scanning electron microscopy and X-ray spectroscopy
2014, China
YY/T 0993-2015
Biological evaluation of medical devices containing nanomaterials: In vitro cytotoxicity test (MTT and LDH test test)
2015, China
YY/T 1295-2015
Biological evaluation of medical devices containing nanomaterials: bacterial endotoxin test
2015, China
RMs
Particle mean diameter: 33 items, Gold Nanorod: 803.6 ± 2.8nm, CdSe QD: 536.1 ± 2.7nm, Specific surface area: 6 items, Step height: Si-SiO2 x 5 , Young's modules: 4 items, Hardness: 4 items
, China
MTD 33 (5110)
Nanotechnologies - Nanomaterials risk evaluation(based on ISO/TR 13121:2011)
2014, India
MTD 33 (5111)
Nanotechnology- vocabulary - part 1: core terms(based on ISO/TS 80004-1.2010)
2014, India
MTD 33 (5112)
Nanotechnology vocabulary - part 3: carbon nano-objects(based on ISO/TS 80004-3:2010)
2014, India
MTD 33(5113)
ISO/TR 11360* Nanotechnologies - Methodology for the classification and categorization of nanomaterials
2012, India
MTD 33 (5114)
Nanotechnologies - Health and safety practices in occupational setting relevant to nanotechnologies(based on ISO/TR 12885:2010)
2014, India
MTD 33(5115)
ISO/TS 27687* Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate
2012, India
MTD 33 (5168)
Nanotechnologies - materials specifications- Guidance on specifying nano objects
2014, India
MTD 33 (5169)
Nanotechnologies - Determination of elemental impurities in samples carbon nanotubes using inductively coupled plasma mass spectrometry
2014, India
MTD 33 (5170)
Nanotechnologies - Endotoxin test on nanomaterials samples for in vitro systems - limulus amebocyte lysate(LaL) test
2014, India
ISO/TS 80004-1
Nanotechnologies - Vocabulary - Part 1: Core terms
2011, Indonesia
ISO/TS 80004-3
Nanotechnologies -Vocabulary - Part 3: Carbon nano-objects
2011, Indonesia
ISO/TR 11360
Nanotechnologies - Methodology for the classification and categorization of nanomaterials
2011, Indonesia
SNI ISO/TS 10867
Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
2011, Indonesia
SNI ISO 29701
Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test
2011, Indonesia
ISO/TS 27687
Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate
2011, Indonesia
ISO/TR 12885:2008
Nanotechnologies - Health and safety practices in occupational settings relevant to nanotechnologies
2012, Indonesia
ISO 10801:2010
Nanotechnologies - Genaration of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
2012, Indonesia
ISO 10808:2010
Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
2012, Indonesia
ISO/TS 12805:2011
Nanotechnologies - Materials specifications-guidance on specifying nano-objects
2012, Indonesia
ISO/TS 80004-4:2011
Nanotechnologies - Vocabulary- Part 4: nanostructured materials
2012, Indonesia
ISO/TS 80004-5:2011
Nanotechnologies - Vocabulary- Part 5: nano/bio interface
2012, Indonesia
ISO/TS 80004-7:2011
Nanotechnologies - Vocabulary-Part 7: Diagnostics and therapeutics for healthcare
2012, Indonesia
ISIRI 12693
Nanotechnologies - Analysis of hemolytic properties of nanoparticles
, Iran
ISIRI 12325
Nanotechnology - Health and safety in nano-occupational settings - Code of Practices
, Iran
ISIRI 12098
Nanotechnology - Vocabulary and Main Definition (In Farsi language)
2010, Iran
ISIRI 13566
Nanotechnologies - Nanotechnology-Evaluation of the effect of nanoparticulate materials on the formation of mouse granulocyte - Macrophage colonies-Test method
2011, Iran
ISIRI 13731
Characterization of Single Walled Carbon Nanotubes using Near Infra Red Photoluminescence Spectroscopy (adopt from ISO)
2010, Iran
ISIRI 13736
nanotechnologies - safe packaging and transport of nanomaterails - code of practice
2011, Iran
ISIRI 14095
Nanotechnologies - Characterization of single wall carbon nanotubes using scanning electron microscopy (SEM) and energy dispersive spectrometry analysis (EDX) (adoption of ISO)
2011, Iran
ISIRI 14152
Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation condensation method (adoption of ISO)
2012, Iran
ISIRI 14153
Nanotechnologies - endotoxin test on nanomaterial samples for in vitro systems-Lumulus Amebocyte Lysate (LAL) test (adoption of ISO)
2011, Iran
ISIRI 14564
Nanotechnologies - Characterization of single wall carbon nanotubes using thermo gravimetric Analysis (adoption of ISO)
2011, Iran
ISIRI 16523
Nanotechnology - Guide to scanner and tip related artifacts in scanning tunnelling microscopy and atomic force microscopy
2013, Iran
ISIRI 16464
Nanotechnologies - Material specifications - Guidance on specifying nano-objects (adoption of ISO)
2013, Iran
INSO 14463
Nanotechnologies - Characterization of multiwall carbon nanotubes - Mesoscopic shape factors (adoption of ISO)
2013, Iran
ISIRI 14744
Nanotechnologies - Methodology for the classification and categorization of nanomaterials (adoption of ISO)
2012, Iran
ISIRI 14743
Nanotechnologies - Characterization of single wall carbon nanotubes using ultra violet - visible near infrared (UV-Vis - NIR) (adoption of ISO)
2012, Iran
INSO 17148
Nanotechnologies - Standard practice for Calibrating the Z - magnification of an atomic force microscopic at subnanometer displacement levels using Si(111) monotomic steps
2014, Iran
INSO 17149
Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (adoption of ISO)
2014, Iran
INSO 17150
Nanotechnologies - Guidance for developing representative test materials consisting of nano-objects in dry powder form (adoption of ISO)
2014, Iran
INSO 17222
Nanotechnologies - Nanoscale calcium carbonate in powder form - Characteristics and measurement (adoption of ISO)
2014, Iran
INSO 17990
Nanotechnologies - Nanoscale titanium dioxide in powder form- Characteristics and measurement (adoption of ISO)
2014, Iran
INSO 17991
Nanotechnologies - Characterization of multiwall carbon nanotube( MWCNT) samples (adoption of ISO)
2014, Iran
INSO 17992
Nanotechnologies - Guidance on Voluntary labeling for consumers products containing manufactured nano- objects (adoption of ISO)
2014, Iran
INSO 17993
Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry (adoption of ISO)
2014, Iran
INSO 18085
Nanotechnologies - Characterization of Single - wall carbon nanotubes using transmission electron microscopy (adoption of ISO)
2014, Iran
INSO 18086
Nanotechnologies - Guidance on methods for nano - and microtribology measurements (adoption of ISO)
2014, Iran
INSO 18392-4
Nanotechnologies - Vocabulary-Part 4: Nanostructured materials (adoption of ISO)
2014, Iran
INSO 18392-7
Nanotechnologies - Vocabulary-Part 7: Diagnostics and therapeutics for healthcare (adoption of ISO)
2014, Iran
JIS R 1701-1:2004
Test method for air purification performance of photocatalytic materials - Part 1: Removal of nitric oxide*
2004, Japan
JIS R 1702:2006
Test method for antibacterial activity of photocatalytic products under photo irradiation and efficacy*
2006, Japan
JIS R 1703-1:2007
Test method for self-cleaning performance of photocatalytic materials - Part 1: Measurement of water contact angle*
2007, Japan
JIS R 1703-2:2007
Test method for self-cleaning performance of photocatalytic materials - Part 2: Decomposition of wet methylene blue*
2007, Japan
JIS R 1704:2007
Test method for water-purification performance of photocatalytic materials by measurement of forming ability of active oxygen*
2007, Japan
JIS R 1705:2008
Test method for antifungal activity of photocatalytic products under photoirradiation*
2008, Japan
JIS R 1709:2007
Light source for test of photocatalytic materials used under ultraviolet*
2007, Japan
JIS R 1701-2:2008
Test method for air purification performance of photocatalytic materials - Part 2: Removal of acetaldehyde*
2008, Japan
JIS R 1701-3:2008
Test method for air purification performance of photocatalytic materials - Part 3: Removal of toluene*
2008, Japan
JIS R 1701-4:2008
Test method for air purification performance of photocatalytic materials - Part 4: Removal of formaldehyde*
2008, Japan
JIS R 1701-5:2008
Test method for air purification performance of photocatalytic materials - Part 5: Removal of methyl mercaptan*
2008, Japan
JIS R 1701-1:2004/AMENDMENT:2010
Test method for air purification performance of photocatalytic materials - Part 1: Removal of nitric oxide (amendment)
2010, Japan
JIS R 1705:2008
Test method for antifugal activity of photocatalytic products under photoirradiation*
2008, Japan
JIS R 1705:2008 /AMENDMENT 1:2010
Test method for antifungal activity of photocatalytic products under photoirradiation (amendment 1)
2010, Japan
JIS Z8981:2010
Quantitative analysis methods for C60 fullerene and C70 fullerene by high performance liquid chromatography (May, 2010)
2010, Japan
TS Z0027:2010
(ISO/TS 27687:2008) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate
2010, Japan
TS Z 0030-3:2011
(ISO/TS 80004-3:2010, IDT) Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects
2011, Japan
JIS B 9916:2010
(ISO 21501-3:2007, MOD) Light extinction liquid-borne particle counter
2010, Japan
JIS B 9921:2010
(ISO 21501-4:2007, MOD ) Light scattering airborne particle counter for clean spaces
2010, Japan
JIS B 9925:2010
(ISO 21501-2:2007, MOD）Light scattering liquid-borne particle counter
2010, Japan
JIS R 1703-2:2014(revised)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of photocatalytic materials - Part 2: Decomposition of wet methylene blue
2014, Japan
JIS R 1706:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of antiviralactivity of photocatalytic materials - Test method using bacteriophage Q-beta
2013, Japan
JIS R 1709:2014(revised)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Light source for test of photocatalytic materials used under ultraviolet
2014, Japan
JIS R 1750:2012
Fine ceramics - Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
2012, Japan
JIS R 1751-1:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 1: Removal of nitric oxide
2013, Japan
JIS R 1751-2:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 2: Removal of acetaldehyde
2013, Japan
JIS R 1751-3:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 3: Removal of toluene
2013, Japan
JIS R 1751-4:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 4: Removal of formaldehyde
2013, Japan
JIS R 1751-5:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 5: Removal of methylmercaptan
2013, Japan
JIS R 1751-6:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 6: Removal of formaldehyde by small chamber method
2013, Japan
JIS R 1752:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of photocatalytic products and efficacy under indoor lighting environment
2013, Japan
JIS R 1753:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of photocatalytic products and efficacy under indoor lighting environment
2013, Japan
JIS R 1756:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of antiviralactivity of photocatalytic materials under indoor lighting environment - Test method using bacteriophage Q-beta
2013, Japan
JIS R 1757:2013
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method of complete decomposition by photocatalytic materials under indoor lighting environment - Decomposition of acetaldehyde
2013, Japan
RM
Particle mean diameter: 27 items
, Japan
RM
Particle mean diameter, particle number concentration: 4 items, Atomic step height: 2 item
, Japan
CRM
Thickness: 3 items, Light scattering intensity averaged diameter: 1 item
, Japan
KSL 1622-2011
Glossary of terms used in photocatalysts
2011, Korea
KS D 2711-2008
Evaluation of carbon nanotube soots and non-carbon content - Thermogravimetric analysis (revision 2008/12/26)
2008, Korea
KS D 2712-2008
Evaluation of content of single-walled carbon nanotube using UV-VIS-NIR absorption spectroscopy (revision 2008/12/26)
2008, Korea
KS D 2713-2007
Evaluation of spatial resolution of USOM (near-field scanning optical Microscope)
2007, Korea
KS D 2714-2007
Scanning Probe Microscope- Method for lateral force microscope
2007, Korea
KS D 2715-2007
Tensile specimen of single- and poly-crystal nano/micro thin film materials
2007, Korea
KS D 2716-2008
Measurement of nanoparticle diameter - Transmission electron microscope
2008, Korea
KS D 2717-2008
Evaluation of metallic/semiconductiong ratio of single-walled carbon nanotube soots using UV-VIS_NIR absorption spectroscopy
2008, Korea
KS A 6202-2012
Guidance to safe handling of manufactured nanomaterials in workplace/laboratory
2012, Korea
KS A 6203-2012
Guidance on safe management of nanotechnology - based products
2012, Korea
KSC8014-2011
Carbon nano tube(CNT) panel for general lighting - Safety requirements
2011, Korea
KSC8015-2011
Carbon nanotube (CNT) panel for general lighting - performance requirements
2011, Korea
KSK0103-2011
Technical terms for membranes and membrane processes
2011, Korea
KSA ISOTS 27628-2008
Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment
2008, Korea
KSA ISOTS 27687-2009
Nanotechnologies-Terminology and definitions for nano-objects-Nanoparticle, nanofibre and nanoplate
2009, Korea
KSA ISO 10801
Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
2014, Korea
KSA ISO 10808
Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
2014, Korea
KSA ISO TR 13329
Nanomaterials - Preparation of Material Safety Data Sheet (MSDS)
2014 , Korea
KS I ISO28439
Workplace atmospheres “Characterization of ultrafine aerosols/ nanoaerosols” Determination of the size distribution and number concentration using differential electrical mobility analysing systems
2013, Korea
TNS M017001-2012
Nanoproduct: method of dimensional measurement of nanoparticles on surface － scanning electron microscope
2012, Taiwan
TNS A001001-2012
Chinese version on “Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate” (ISO/TS 27687)
2012, Taiwan
Dictionary-2007
Nanotechnology Dictionary (2007.12)
2007, Taiwan
CNS 14975-2006
Terminology for nanomaterials
2006, Taiwan
CNS 15094-2007
Fine ceramics - Test method for air purification performance of photocatalytic materials – Part 1: Removal of nitric oxide
2007, Taiwan
CNS 15094-1
Fine ceramics - Test method for air purification performance of photocatalytic materials - Part 1: Removal of nitric oxide
2011, Taiwan
CNS 15094-2
Fine ceramics - Test method for air purification performance of photocatalytic materials - Part 2: Removal of acetaldehyde
2011, Taiwan
CNS 15094-3
Fine Ceramics - Test method for air purification performance of photocatalyst materials - Part 3: Removal of toluene
2011, Taiwan
CNS 15094-4
Fine Ceramics - Test method for air purification performance of photocatalyst materials - Part 4: Removal of formaldehyde
2011, Taiwan
CNS 15094-5
Fine Ceramics - Test method for air purification performance of photocatalyst materials - Part 5: Removal of methyl mercaptan
2011, Taiwan
CNS 15377-2010
Fine ceramics - Light source for test of photocatalytic materials used under ultraviolet
2010, Taiwan
CNS 15378-1-2010
Fine ceramics - Test method for self-cleaning performance of photocatalytic materials - Part 1: Measurement of water contact angle
2010, Taiwan
CNS 15378-2-2010
Fine ceramics - Test method for self-cleaning performance of photocatalytic materials - Part 2: Decomposition of wet methylene blue
2010, Taiwan
CNS 15379-2010
Fine ceramics - Test method for water-purification performance of photocatalytic materials by measurement of forming ability of active oxygen
2010, Taiwan
CNS 15380-2010
Fine ceramics - Test method for antibacterial activity of photocatalytic
2010, Taiwan
CNS 15505
Fine ceramics - Test method for antifungal activity of photocatalytic products under photoirratiarion
2011, Taiwan
RM
Standard Step-height materials (3nm, 50nm, 100nm)
, Taiwan
ISO Standards
Code
Title
Published
PG01
TS 27687-2008 - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (replace with TS 80004-2 Vocabulary - Part 2: Nano-objects - Nanoparticle, nanofibre and nanoplate)
Published
PG02
TR 12802-2010 - Nanotechnologies -- Model taxonomic framework for use in developing vocabularies - Core concepts
Published
PG03
TS 80004-3:2010 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects
Published, 2010 Revision
PG04
TR 11360:2010 Nanotechnologies - Methodology for the classification and categorization of nanomaterials
Published
PG05*
TS 80004-1:2010 Nanotechnologies - Vocabulary - Part 1: Core terms
Published, 2010 Revision
PG06
TS 80004-4:2011 - Vocabulary - Part 4 - Nanostructured materials
Published, 2011 Revision
PG07
TS 80004-5:2011 - Vocabulary - Part 5 - Nano/bio interface
Published, 2011 Revision
PG08
TS 80004-6:2013 - Vocabulary - Part 6 - Nano-object characterisation
Published
PG09
TS 80004-7:2011 - Vocabulary - Part 7- Diagnostics and therapeutics for healthcare
Published, 2011 Revision
PG10
TS 80004-8:2013 - Vocabulary - Part 8 - Nanomanufacturing processes
Published
PG11
TR 14786:2014 - Nanotechnologies - Considerations for the development of chemical nomenclature for selected nano-objects
Published
PG12
TR 17302 - Framework for Identifying Vocabulary Development for Nanotechnology Applications in Human Healthcare
Published
PG13
TR 18110 Nanotechnologies - Vocabularies for science, technology and innovation Indicators
Published
PG14
TR 18401 Plain language guide - Explanation of core terms with examples
DTR ballot
PG15
TS 80004-9 Nanotechnologies - Vocabulary - Part 9: Nano-enabled electrotechnical products and systems
Publishing
PG16
TS 80004-10 Vocabulary - Part 10: Nano-enabled photonic components and systems
Return to PWI
PG17
TS 80004-11 Vocabulary - Part 11: Nanolayer, nanocoating, nanofilms, and related terms
Publishing
PG18
TS 80004-12 Vocabulary - Part 12: Quantum phenomena in nanotechnology
Published
PG19
TS 80004-13 Vocabulary - Part 13: Graphene and other two dimensional materials
DTS
PG20
TS 20477 Standard terms and their definition for cellulose nanomaterial
DTS
TG01
Nomenclature model for nanomaterials - IUPAC Committees for (1)Nanoscale metals clusters: kick off meeting started, (2)carbon nanotubes: Kick off meeting to be scheduled in near future, (3)IUPAC workplans established, international experts selected, and I
TG03
Taxonomic terminology database
PG01
TS 10797 Nanotubes - Use of transmission electron microscopy (TEM) in walled carbon nanotubes (SWCNTs)
Published, Revision
PG02
TS 10798 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
Published, Revision
PG03
TS 10868 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
Published, Revision DTS
PG04
TS 10867 :2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
Published, Revision
PG05
TR 10929 Measurement methods for the characterization of multi-walled carbon nanotubes (MWCNTs)
Published
PG06
TS 11251:2010 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
Published, Revision
PG07
TS 11308 Nanotechnologies - Use of thermo-gravimetric analysis (TGA) in the purity evaluation of single-walled carbon nanotubes (SWCNT)
Published, Revision
PG08
TS 10812 Nanotechnologies - Use of Raman spectroscopy in the characterization of single-walled carbon nanotubes (SWCNTs)
Cancelled
PG09
TS 11888 Determination of mesoscopic shape factors of multiwalled carbon nanotubes (MWCNTs)
Published, Revision DTS
PG10
TS 12025 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols
Published, Revision DTS
PG11
TS 62622 Artificial gratings used in nanotechnology -- Description and measurement of dimensional quality parameters
Published
PG12
TS 13278 Carbon nanotubes - Determination of metal impurities in carbon nanotubes (CNTs) using inductively coupled plasma-mass spectroscopy (ICP-MS)
Published, Revision
PG13
TS 16195 Nanotechnologies - Guidance for developing test materials consisting of nano-objects in dry powder form
Published, Revision
PG14
TS17466 Use of UV-Vis Absorption Spectroscopy in the Characterization of Cadmium Chalcogenide Quantum Dots
published
PG15
TR18196 Measurement technique matrix for manufactured nano-objects
published
PG16
TS19590 Detection and sizing of nanoparticles in aqueous media via single particle ICP-MS
publishing
PG17
TR19716 Characterization of cellulose nanocrystals - Particle morphology, purity and surface properties
published
PG18
TR19733 Matrix of characterization and measurement methods for graphene
WD
PG19
TR 20489 Separation and size fractionation for the characterization of metalbased nanoparticles in water samples
WD
PG 20
TS 19805 On-line/Off-line techniques for characterizing size distribution of airborne nanoparticle populations
WD
IEC lead
IEC 62565-3-1 Nanomanufacturing - Material specifications - Part 3-1: Graphene - Blank detail Specification
CD approved
IEC lead
EC/NP 62607-6-3 Nanomanufacturing - Key control characteristics – Part 6-3: Graphene - Characterization of graphene domains and defects
WD
PWI 1
PWI 19749 Determination of size and size distribution of nano-objects by scanning electron microscopy
PWI
PWI 2
PWI 21346 Nanotechnologies - Characterization of cellulose elementary fibril samples
PWI
PWI 3
PWI 21356 Nanotechnologies - Structural characterization of graphene
PWI
PWI 4
PWI 21357 Nanotechnologies - Measurement of average nanoparticle size and assessment of agglomeration state by static multiple light scattering (SMLS) in concentrated media
PWI
PWI 5
PWI 21361 Nanotechnologies - Identification and quantification of airborne nano-objects in a mixed dust industrial environment
PWI
PWI 6
PWI 21362 Nanotechnologies - Application of field flow fractionation for characterization of nanomaterial contents
PWI
PWI 7
PWI 21363 Nanotechnologies - Protocol for particle size distribution by transmission electron Microscopy
PWI
Nanotechnologies - 3-D Tomography in a Transmission Electron Microscope (TEM)
PWI/TS is recommended
PG1
TR 12885 Nanotechnologies - Health and safety practices in occupational settings relevant to nanotechnologies
Published, Revision
PG2
ISO 29701 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test
Published, Revision
PG3
ISO 10801 Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
Published, Revision
PG4
ISO 10808 Nanotechnologies Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
Published, Revision
PG5
TR 13014 Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
Published
PG6
TS 12901-1 Nanotechnologies -Occupational risk management applied to engineered nanomaterials Part 1:Principles and approaches
Published, Revision
PG7
TR 13121 Nanomaterial risk Evaluation
Published
PG8
TS 12901-2 Nanotechnologies - Occupational risk management applied to engineered nanomaterials - Part 2: Use of the control banding approach
Published
PG9
TR 13329 Nanotechnologies - Safety Data Sheet (SDS) preparation for manufactured nanomaterials
Published
PG10
TS 14101 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR Method
Published Revision
PG11
TR 16197 Compilation and description of toxicological screening methods for manufactured nanomaterials
Published
PG12
TR16196 Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials
FDIS
PG13
TS 16550 Nanoparticles - Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus
Published
PG14
TS 13830 Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects
Published
PG15
TR 18637 General framework for the development of occupational exposure limits for nano-objects and their aggregates and agglomerates
publishing
PG16
TS 18827 Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials
DTS
PG17
ISO 19007 Modified MTS assay for measuring the effect of nanoparticles on cell viability
DIS
PG18
ISO 19006 DCFH-DA assay for evaluating nanoparticle-induced intracellular reactive oxygen species (ROS) production
Published
PG19
TR 19057 Nanotechnologies - Use and application of cellular in vitro tests and methodologies to assess nanomaterial biodurability
DTR
PG20
TS 19337 Characteristics and measurement methods of nano-object working suspensions required for validity evaluation of in vitro toxicity testing
Published
PG21
TR 19601 Nanotechnologies - Nano-object Aerosol Generators for Inhalation Toxicity Studies
DTR
PG22
ISO/NP TS 20787 Nanotechnologies Aquatic toxicity assessment of nanomaterials using Artemia Sp
WD
PG23
ISO/NP 20814 Nanotechnologies - Photocatalytic activity assay for nanoparticles in aqueous Suspension
WD
PG24
ISO/NP TR 21386 Nanotechnologies - Considerations for the measurement of nano-objects, and their aggregates and agglomerates (NOAA) in the Environment
WD
PG25
TR 21624 Considerations for in vitro studies of airborne engineered nanomaterials
WD
PG26
TR 21633 Label-free impedance technology to assess the toxicity of nanomaterials in Vitro
WD
PG27
TR 22019 Considerations in performing toxicokinetic studies of nanomaterials
WD
PG1
TS 11931 Nanotechnologies - Nano-calcium carbonate: Characteristics and measurement methods
Published
PG2
TS 11937 Nanotechnologies - Nano-titanium dioxide: Characteristics and measurement methods
PG3
TS 12805 Nanotechnologies - Materials specifications - Guidance on specifying nano-objects
Published
x
TS 11931-2 Nanotechnologies - Nano-calcium carbonate - Part 2: Specifications in selected application areas
Published (transferred to ISO/TC256)
x
TS 11937-2 Nanotechnologies - Nano-titanium dioxide - Part 2: Specifications in selected application areas
Published (transferred to ISO/TC256)
PG4
TS 17200:2013 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements
Published
PG5
ISO 19807 Magnetic nanosuspension
WD
PG6
ISO/NP TS 20660 Nanotechnologies - Materials specification - Antibacterial silver nanoparticles
WD
PG7
ISO/NP TS 21236 Nanotechnologies - Nanoclays: characteristics and measurements
WD
PG8
ISO/NP TS 21237 Nanotechnologies - Nanoenhanced air filter media using nanofibres; Characteristics, Performances and Measurement Methods
WD
PG9
ISO/NP TS 19808 Specification for carbon nanotube dispersions
WD
PG10
ISO/NP TS 21412 Nanotechnologies - Nanostructured layers for enhanced electrochemical bio-sensing applications - Characteristics and measurements
WD
PG11
ISO/NP TS 21975 Nanotechnologies - Polymeric nanocomposite films for food packaging - Barrier properties: characteristics and measurement methods
WD
PG12
PWI on nanoclay for gas barrier film
WD
PG13
PWI on nanofluids for heat management
WD
PG14
PWI on superparamagnetic beads
WD
IEC TC 113 Publications
Code
Title
Published
IEC PAS 62565-2-1:2011
Nanomanufacturing - Material specifications - Part 2-1: Single-wall carbon nanotubes - Blank detail specification
IEC TS 62607-2-1:2012
Nanomanufacturing - Key control characteristics - Part 2-1: Carbon nanotube materials - Film resistance
IEC 62607-3-1:2014
Nanomanufacturing - Key control characteristics - Part 3-1: Luminescent nanomaterials - Quantum efficiency
IEC TS 62607-3-2:2017
Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion
IEC TS 62607-4-1:2015
Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterisation, 2-electrode cell method
IEC TS 62607-4-2:2016
Nanomanufacturing - Key control characteristics - Part 4-2: Nano-enabled electrical energy storage - Physical characterization of cathode nanomaterials, density measurement
IEC TS 62607-4-3:2015
Nanomanufacturing - Key control characteristics - Part 4-3: Nano-enabled electrical energy storage - Contact and coating resistivity measurements for nanomaterials
IEC TS 62607-4-4:2016
Nanomanufacturing - Key control characteristics - Part 4-4: Nano-enabled electrical energy storage - Thermal characterization of nanomaterials, nail penetration method
IEC TS 62607-4-5:2017
Nanomanufacturing - Key control characteristics - Part 4-5: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterization, 3-electrode cell method
IEC TS 62607-5-1:2014
Nanomanufacturing - Key control characteristics - Part 5-1: Thin-film organic/nano electronic devices - Carrier transport measurements
IEC TS 62607-6-4:2016
Nanomanufacturing - Key control characteristics - Part 6-4: Graphene - Surface conductance measurement using resonant cavity
IEC TS 62622:2012
Nanotechnologies - Description, measurement and dimensional quality parameters of artificial gratings
IEC 62624:2009
Test methods for measurement of electrical properties of carbon nanotubes
IEC TR 62632:2013
Nanoscale electrical contacts and interconnects
IEC/IEEE 62659:2015
Nanomanufacturing - Large scale manufacturing for nanoelectronics
IEC TR 62834:2013
IEC nanoelectronics standardization roadmap
IEC TS 62844:2016
Guidelines for quality and risk assessment for nano-enabled electrotechnical products
IEC 62860:2013
Test methods for the characterization of organic transistors and materials
IEC 62860-1:2013
Test methods for the characterization of organic transistor-based ring oscillators
IEC TS 80004-9:2017
Nanotechnologies - Vocabulary - Part 9: Nano-enabled electrotechnical products and systems
ISO TS 80004-1:2015
Nanotechnologies - Vocabulary -- Part 1: Core terms
ISO TS 80004-2:2015
Nanotechnologies - Vocabulary - Part 2: Nano-objects
ISO TS 80004-3:2010
Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects
ISO TS 80004-4:2011
Nanotechnologies - Vocabulary - Part 4: Nanostructured materials
ISO TS 80004-5:2011
Nanotechnologies - Vocabulary - Part 5: Nano/bio interface
ISO TS 80004-6:2013
Nanotechnologies - Vocabulary - Part 6: Nano-object characterization
ISO TS 80004-7:2011
Nanotechnologies - Vocabulary - Part 7: Diagnostics and therapeutics for healthcare
ISO TS 80004-8:2013
Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes